J & J Electronics ColorSplash XG Controller

Had the first one installed by the pool company after a resurface. Worked great. We were upgrading outdoor lighting a few months later and found out the GFCI in the pool equipment panel was fused in teh always on position and would not trip. Replaced the GFCI and when we switched the light controller on it the pushbutton flashed on momentarily and the breaker tripped. Reset the breaker, no button flash but the breaker still tripped. Bought the replacement and had a professional electrician service come out and make sure everything was hooked up correctly according to the instructions. Same result. Now I have tow blown controllers. Replaced it with a standard light switch and everything works fine, although the light only has one default setting of random progression through all the colors which is not so bad). Tested ground leakage and it is well below the 2 volt standard (0.4 volts). Not making the mase mistake three times.

Great look with great results and a good price

Works great! Easy setup with Bluetooth! A nice upgrade from just flipping the switch on and off for the desired color. I had to run a neutral wire to make it work, but it was a very short distance. You might want to see if you will need to add a neutral wire and see how difficult it will be to run the wire. The shipping with "Sunplay" was a little slow, had to call to get an update, but their costumer service was great.

This is exactly what I needed, I can control on/off and all color changes from my phone