E-Z Patch 23 Joint Seal

Item #: EZP-331
$42.90

This item is IN STOCK

This item is TEMPORARILY OUT OF STOCK

Usually Ships Within 1 Business Day

Expedited Shipping NOT Available Not Available Outside Contiguous US
Notify me when restocked

Item Details

E-Z Patch 23 Joint Seal

E-Z Patch 23 Self-Leveling Expansion Joint Sealantis the first and still the very best formula of Oxime Neutral Cure 100% Silicone Rubber Expansion Joint Sealant. E-Z Patch 23 can be installed in temperatures as low as 0° F. It is UV stable, has little odor, non-shrinking, non-corrosive and has a 50 year life expectancy.

The caulk gun application leaves very little waste and easy clean up.It provides an excellent, self-leveling, non-porous, easy to clean surface.The surface of the sealant will dry in half an hour to 2 hours and will cure thru in 12 to 48 hours, depending on thickness, temperature and humidity.

Features:

  • Self Leveling Expansion Joint Sealant
  • No mixing, tooling or primer needed
  • Excellent self-leveling
  • UV light stable
  • 50 Year life expectancy
  • Surfaces dries in 1/2 hour to 2 hours
  • Non-shrinking and long lasting
  • Full cure in just 12 to 48 hours

Size:

  • 29 Ounces

Instructions:

  • 1. Depth of sealant should be 1/3 to 1/2 the width of joint (1/4" minimum depth). Coverage for a1/2" wide joint with 1/4" depth is 35 LinearFeet.
  • 2. Cut down or remove old existing expansion joint (if any).
  • 3. Surface must be clean and dry. Remove any old sealant, old paint, oil, grease or soap.
  • 4. Fill the joint to desired depth with dry silica sand or polyethylene backer rod.
  • 5. Seal ends of joint and any side cracks, etc. with cement repair materials or caulking.
  • 6. Cut tip of cartridge and puncture inner foil seal several times (or unscrew tip and cut end).
  • 7. Apply E-Z Patch 23 evenly in the expansion joint finishing 1/8" below level of concrete surface.
  • 8. When finished, seal tip and store remainder of cartridge upright, away from high heat.
  • 9. Clean-up with paper towel (and mineral spirits or rubbing alcohol if desired).
  • Protect From rain for 2 hours
  • Allow 12 hours curing before foot traffic and 48 hours for automobiles
  • Product is non paintable unless you apply sand to the top surface after it has set for 15 minutes.

E-Z Patch EZP-331

    Customer Reviews

    No reviews yet
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)

    Recently Viewed

    Customer Reviews

    No reviews yet
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)