Speck Pumps Model 21-80/33 BS Pump SA103-1400F-0BS - 4 Horsepower - 3 PhaseItem #: SA104-1400F-0BS
Same Day Delivery
Place your order before 2:00 PM and we'll drop it off on your doorstep today! Orders placed after 2:00 PM will be delivered the next day. Every delivery includes a free digital water analysis.
Same Day Pickup
Place your order before 2:00 PM and we'll have it ready for pick-up today. Orders placed after 2:00 PM will be ready the next day.
OgdenSunplay - Ogden
216 N 700 W
Building 4C - Bay 5
Ogden, UT 84404
9am - 5pm, M-F
Las VegasSunplay - Las Vegas
2950 E Sunset Rd
Las Vegas, NV 89120
10am - 6pm, M-F
10am -4pm, Weekends
Speck Pumps Model 21-80/33 Pump SA104-1400F-0BS
The Speck Model 21-80/33 is a high efficiency pool pump for specialty applications. The Model 21-80/33 is ideally suited for commercial vacuum and sand filters, hydrotherapy, swim spas, waterfalls, water slides, and vanishing edge pool applications.
This pump design provides maximum flow at low head and has 250 cubic inch all plastic strainer tank, and is self-priming up to 4 feet.
- Pool pump ideally suited for commercial vacuum and sand filters, hydrotherapy, swim spas, waterfalls, water slides, and vanishing edge pool applications.
- This high volume, low head pump comes complete with our unique mechanical shaft seal that allows the pump, if mistreated, to run dry for up to one hour.
- The pump can be used for pool water with a salt concentration of up to 5000 ppm.
- Pump parts are made of 100% recyclable plastic. Non-corrosive, chemical/UV resistant, and can withstand temperatures of up to 175° F.
- For pool users’ safety, the impeller has a dielectric shaft sleeve that provides absolute separation between the pool water and electric parts.
- All models are equipped with 4″ female slip adaptor on suction of strainer tank and 4″ male slip adaptors on the discharge.
- Heavy duty “1081” E-plus /extreme-E energy efficient pool motor with large 56 frame is thermally protected (no motor starter required).
PSC switchless design and extra large sealed ball bearings.
- Motor is easy to remove without disturbing the plumbing. Reusable o-rings throughout.
- Every pump is performance tested before leaving the Speck factory.
- Horsepower: 4 Horsepower (5.0 THP)
- Speed: Single
- Voltage: 3 Phase 200-230/460
- Frame: 56 Frame
- Service Factor: 1.25
Speck Pumps SA103-1400F-0BS