Olympic Prep Magic Pool Cleaning Solution

Olympic Prep Magic Pool Cleaning Solution

The most important aspect of coating a pool is surface preparation. Your new coating will not adhere to even the slightest oily residue such as suntan lotion, body oils, hair spray, algae or anything that comes between the pool surface and the new coating.

Olympic Prep Magic is a one-step, clean and etch pool surface preparation solution that allows you to clean your surface without the extra steps of traditional surface cleaning. Simply mix PREP MAGIC with water, clean your surface, and then rinse

This product can be used on bare concrete, gunite, marcite, bare fiberglass, plaster, and painted surfaces.

Features:

• All-in-one solution for preparing your pool surface for paint or other coating
• One-Step Clean and Etch
• Turns 3 steps into 1-step process
• Can be used on concrete, gunite, marcite, fiberglass, plaster and painted surfaces
• Ensures your coating will not adhere to even the slightest oily residue for the strongest bond possible
• VOC Compliant
• Low-Odor
• Biodegradable
• Water Rinse to Neutralize
• Cleans Pool Filters

Size:

• 1 Gallon

Following are dilution rates for various surfaces:

• For Bare Concrete, Marcite, Gunite, and Plaster: Mix 1 gallon of PrepMagic with 2 gallons of water. Always use a water-filled plastic container before pouring in the PREP MAGIC. This will clean and etch approximately 400 square feet.
• For Bare Fiberglass and Painted Surfaces: Mix 1 gallon of PrepMagic with 4 gallons of water. Always use a water-filled plastic container before pouring in the PREP MAGIC. This will clean and etch approximately 700 square feet.

Directions:

1. Wet surface with water.
2. Use a garden sprayer or similar equipment to apply solution.
3. Scrub surface thoroughly until foam stops.
4. Rinse thoroughly and allow to dry completely, unless using a waterbased product.