parent
parent
parent
parent
parent

HydroQuip Therm Products Hot Spring Heater - 6 KW

Item #: 26-C3160-1S
$289.95

This item is IN STOCK

This item is TEMPORARILY OUT OF STOCK

Usually Ships Within 1 Business Day

Expedited Shipping Available

This item is IN STOCK

This item is TEMPORARILY OUT OF STOCK

Usually Ships Within 1 Business Day

Expedited Shipping Available
Notify me when restocked

Item Details

Therm Products Hot Spring Heater

Features:

  • Therm Products by HydroQuip Replacement for Hot Spring 6 KW PDR Heater Assemblies
  • Includes both sensors, drain tube, clamps
  • Titanium heating elements
  • Low Flow design improves efficiency
  • Compatible with most Tiger River Spas and Hot Springs systems from 1995 - current
  • Replaces discontinued trumpet style heater assembly

Specifications:

  • Required Flow Rate: 8 GPM
  • Installation: No Modifications Required
  • Element Material: Titanium
  • Wattage: 6000 with 240 Volt System or 1500 Watts with 120 Volt System
  • Voltage: 120 or 240
  • UL Listed
  • Made in the USA

Includes:

  • Sensors
  • 18" of 1" O.D. Tubing
  • 12" of 3/8" O.D. Tubing
  • Barb Coupling 1/4" x 1/4"
  • Instructions
Replaces:
  • Watkins Hot Spring Heaters 73790 and 76227

HydroQuip 26-C3160-1S

Customer Reviews

Based on 15 reviews
87%
(13)
7%
(1)
7%
(1)
0%
(0)
0%
(0)
100.0
R
Randall Minvielle

I already filled one of these and sent it back. How many do you want?

T
Tony Mitteer
Slight difference from original

Heater works great and was easy to install. The only negative is that this new heater has two sensors (and associated outbound wires that connect to the tub’s circuit board) versus 3 connections on the original. A little bit of research and I discovered that the third wire (on the original) connected to a low pressure cutoff switch. Apparently the new version of the heater internalizes this function and does not require (or even accommodate) the pressure switch connection. I simply jumped the switch by wiring the ends together with a wire nut. Would have saved some time if the description included this potential difference (and the solution).

M
Mike McGuigan
Heater

Easy to install. Heater works great.

K
Kyle Gause
Slow shipping

Took 11 days to receive other than that product was as advertised

g
gideon lau
after market heater for tigal bengal

I received the item as promised. The initial installment did not work, because of my error, i reinstall the thermistor pin in the right place and now the heater runs like it was suppose to

123

Recently Viewed

Customer Reviews

Based on 15 reviews
87%
(13)
7%
(1)
7%
(1)
0%
(0)
0%
(0)
100.0
R
Randall Minvielle

I already filled one of these and sent it back. How many do you want?

T
Tony Mitteer
Slight difference from original

Heater works great and was easy to install. The only negative is that this new heater has two sensors (and associated outbound wires that connect to the tub’s circuit board) versus 3 connections on the original. A little bit of research and I discovered that the third wire (on the original) connected to a low pressure cutoff switch. Apparently the new version of the heater internalizes this function and does not require (or even accommodate) the pressure switch connection. I simply jumped the switch by wiring the ends together with a wire nut. Would have saved some time if the description included this potential difference (and the solution).

M
Mike McGuigan
Heater

Easy to install. Heater works great.

K
Kyle Gause
Slow shipping

Took 11 days to receive other than that product was as advertised

g
gideon lau
after market heater for tigal bengal

I received the item as promised. The initial installment did not work, because of my error, i reinstall the thermistor pin in the right place and now the heater runs like it was suppose to

123